CognitiveTPG A760 - Manual (Page 84)

A760 User Guide: Programming Supplement
Chapter 4: Programming commands 84 Revision F January 2010
Transmit printer ID
ASCII GS I n
Hexadecimal 1D 49 n
Decimal
29 73 n
Value of n: 1, 49 = Printer model ID
2, 50 = Type ID
3, 51 = ROM version ID
4, 52 = Logo Definition
Transmits the printer ID specified by n as follows:
n Printer ID Specification ID
(Hexadecimal)
1, 49 Printer model ID CognitiveTPG A760 0x28 (A758
emulation and
A760 native
modes)
1, 49 Printer model ID CognitiveTPG A756 0x26 (A756
emulation)
2, 50 Type ID Installed options Refer to the
table below
3, 51 ROM version ID ROM version 0x00
4, 52 Logo definition Logo definition Refer to table
next column
n = 2 or 50: Type ID
Type ID (n = 2)
Bit
Off/On Hex Decimal Function
0 Off 00 0 No two-byte character
code installed.
On 01 1 Two-byte character
code installed.
1 Off 00 0 No knife installed.
On 02 2 Knife installed.
2 - - - Undefined.
3 Off 00 0 No MICR installed.
On 08 8 MICR installed.
4 Off 00 0 Not used. Fixed to Off.
5 - - - Undefined
6 - - - Undefined
7 Off 00 0 Not used. Fixed to Off.
n = 4 : Logo Definition
Bit Off/On Hex Decimal Function
0 Off 00 0 No logo definition
loaded by
application.
On 01 1 Logo loaded by
application
1 - - - Undefined
2 - - - Undefined
3 - - - Undefined
4 Off 00 0 Not used, Fixed to
Off.
5 - - - Undefined
6 - - - Undefined
7 Off 00 0 Not used, Fixed to Off.
Transmits the printer ID specified by n. This command is a
batch mode command; that is, the response is transmitted
after all prior data in the receive buffer has been processed.
There may be a time lag between the printer receiving this
command and transmitting the response, depending on the
receive buffer status.