CognitiveTPG A760 - Manual (Page 45)

A760 User Guide: Programming Supplement
Chapter 4: Programming commands
45 Revision F January 2010
Print and reverse feed n lines
ASCII ESC e n
Hexadecimal 1B 65 n
Decimal
27 101 n
Value of n: The number of lines on the slip station
to be reverse fed.
Range of n: 0 – 255
Prints one line from the buffer and reverse feeds the
paper n lines on the slip station. The receipt station
cannot be reverse fed.
Reverse feed n lines
ASCII GS DC4 n
Hexadecimal 1D 14 n
Decimal
29 20 n
Range of n: 0 – 127 A756 emulation mode
0 – 255 A758 emulation mode and
A760 native mode
Reverses the paper feed in the slip station by n lines at
the current spacing. The next character feed command
returns the paper feed back to the normal feed direction.
This command is ignored if slip is not the selected station.
Current spacing is not a factor.
Reverse feed n dots
ASCII GS NAK n
Hexadecimal 1D 15 n
Decimal
29 21 n
Value of n: n dots at 1/72 inch
Range of n: 0 – 127 A756 emulation mode
0 – 255 A758 emulation mode and
A760 native mode
Reverses the paper feed in the slip station by n dots at
1/72 inch (CognitiveTPG 7150™ command). This
command is ignored if receipt station is selected.