CognitiveTPG A760 - Manual (Page 80)

A760 User Guide: Programming Supplement
Chapter 4: Programming commands 80 Revision F January 2010
Convert 6-dots/mm bitmap to 8-dots/mm bitmap
ASCII AX EOT n
Hexadecimal 1F 04 n
Decimal
31 04 n
Value: 0 = Off
1 = On
(When 0 and 1 are the LSB)
Default: 0 (Off)
Selects or cancels 6-dot/mm A758 graphic emulation in
A758 emulation or A760 native modes.
When the 6-dot/mm emulation is selected, logos and
graphics are expanded horizontally and vertically during
download to emulate their size on a 6-dot/mm printer. The
horizontal positioning commands also emulate positioning
on a 6-dot/mm printer.
Exception
This command is available in A758 or A760 native modes
only.
Enable constant speed logos
ASCII US { n
Hexadecimal 1F 7B n
Decimal
31 123 n
Value: 0 = disabled
1 = enabled
This command allows the firmware to determine the
optimal speed to print a logo. It is set prior to downloading
the logo and reset after the logo has been downloaded. In general, the “Set max target speed (1D A0 nl nh)” is the
preferred command.