AT&T AUDIX Networking 585-300-903 - Manual (Page 227)

Network Considerations A-5
_ ______________________________________________________________________________________
_ ______________________________________________________________________________________ _ ______________________________________________________________________________________
AUDIX NETWORK PLANNING WORKSHEET
Machine Name __________________ Machine Password __________________
Address Ranges: Prefix Starting Extension Ending Extension
_ _________________ _ _________________ _ _________________
_ _________________ _ _________________ _ _________________
_ _________________ _ _________________ _ _________________
_ _________________ _ _________________ _ _________________
Class of Service for Networking ports: _ _______ (Use a separate class of service with only touch tone and data
privacy on it.)
EXTENSIONS:
_ _____________
Type of Connectivity and quantity of DCP extension numbers, if applicable, will depend upon the design. At least
one of the extension numbers must be a DID. Please identify which one is the DID number.
DCP Extension Numbers:_ __________ RS232 Connectivity Extension Numbers:_ __________
_ __________ _ __________
_ __________ RS232 (Converted to DCP Connectivity) Extension Numbers: _ __________
_ __________ _ __________
System 75/G1 Extension Number of Hunt Group(s), if applicable _ ______________
EQUIPMENT (Switch Ports):
_ _________________________
Digital Equipment Locations: _ __-_ __-_ __-_ __-_ __(DCP) _ __-_ __-_ __-_ __-_ __(RS232 Converted)
_ __-_ __-_ __-_ __-_ __(DCP) _ __-_ __-_ __-_ __-_ __(RS232 Converted)
Analog Equipment Locations: _ __-_ __-_ __-_ __-_ __(RS232)
_ __-_ __-_ __-_ __-_ __(RS232)
DIAL STRING:
_ _____________
The Dial String to route messages out
_ __
of this Audix may need to incorporate various switch routing options. Please
identify which switch option this design will implement and the trunk or feature access code being used to
accomplish this. (Mark to the left of the category with an "X".)
_ ___DCS; Main/Satellite; Multi-digit Steering, etc. (Incoming extension numbers will be utilized)
_
___ETN/PNA (FAC _ _______) _ ___ARS (FAC_ _______)
_ ___Dedicated (Static) Trunk Group (TAC _ _______) _ ___OTHER (TAC/FAC _ _______)
For those routing options which utilize a feature access code or only an extension number, please identify the trunk
group number and trunk access code of the facility providing the transmission path:
TG_ __________TAC_ __________
Switchroom Telephone Number: _ ______________ AUDIX Remote Maintenance Number: _ ______________
(Preferably through INADS)
Figure A-2. AUDIX Networking Worksheet