Form fields – AT&T AUDIX Networking 585-300-903 User Manual

Page 165

AUDIX System Administration

13-11

______________________________________________________________________________________

Form Fields

•

machine name

Enter the name of the remote system. Press

ENTER

to make sure this name is not already assigned. At

the bottom of the form you should see ‘‘doesn’t exist’’.

•

local/remote

This is a display-only field. It will display

once the remote system is administered on the local

system.

•

password

Enter 5 to 10 alphanumeric characters. This password does not have to be unique. Record it on paper
so that it will not be forgotten. You will need it when administering the other systems in the network.
It will not be displayed the next time you enter this form.

NOTE

This is not the INADS login password. This password is used only by the local AUDIX
system to access this particular remote AUDIX system.

•

extension length

Enter the length of the extensions used for this remote system.

•

voice name

This field indicates the presence of a recorded machine name fragment; no assignment is required at this
time. Instructions for recording names are given later in this chapter.

•

voice ID

This is a display-only field showing the identifier associated with this machine’s name fragment. The
identifier is used when recording the fragment. The remote AUDIX system voice ID is between 1 and
100.

•

default community

The default community of AUDIX system subscribers for this machine. A community contains those
subscribers who are able to send voice mail messages as permitted on the

system : sending

restriction

form. This value can be overridden for individual subscribers on the

subscriber

: remote

form.

Using this field and the

system : sending restriction

form, you can permit subscribers to

send, or prevent them from receiving, digital networking messages on a community-of-interest basis.
See the AUDIX Feature Descriptions for more information about the sending restrictions feature.