Figure 13-4. the system limits form, Change or run) – AT&T AUDIX Networking 585-300-903 User Manual
Page 177

AUDIX System Administration
13-23
_
______________________________________________________________________________________
_
______________________________________________________________________________________
_
______________________________________________________________________________________
2. Move the cursor to the
subscribers, administered remote
field and type the total
number of administered and nonadministered remote subscribers (for example, 6000). Press
F1
(CHANGE or RUN).
NOTE
AUDIX digital networks typically have a larger number of administered remote
subscribers because the remote updates feature adds remote subscribers automatically.
However, AMIS analog networks typically have a larger number of nonadministered
remote subscribers because subscribers are less likely to be manually administered at
each AMIS analog networking site.
3. Record the value displayed for the
system data
filesystem. This recommended filesystem size
should accommodate all remote subscribers in the network (both administered and nonadministered).
4. Return to the
subscribers, administered remote
field and type the number of
administered remote subscribers (for example, 4000). Press
F1
(CHANGE or RUN).
5. The fields at the bottom of the screen indicate the recommended filesystem sizes for this system
based on the limits you just entered. Record the recommended values for all the filesystems except
the system data filesystem (which you calculated previously).
NOTE
If you have an AUDIX digital networking setup that shares voiced-in names among
machines, increase the size of the
names
filesystem by 10 percent above the figure
shown on this form.
DCORP STATUS: alarms: none, logins: 1, thresholds: none
PATH: system : limits
message lengths, maximum (seconds): ____ minimum (tenths of seconds): __
subscribers, local: 2000
administered remote: 4000
lists, total entries (maximum): _____
lists/subscriber: __ recipients/list: ___
error log entries (maximum): _____
admin log entries (maximum): _____
activity log entries (maximum): _____
messages, total in all mailboxes: ______ awaiting delivery: ______
RECOMMENDED FILESYSTEM SIZES (IN BLOCKS), BASED ON LIMITS
system data:
system status:
voice data:
names:
Error and confirmation information appears on this line.
_
______________________________ _
____________________ _
______________________________
CHANGE ADD DELETE
HELP FIELD
CLEAR EXIT ENTER
OR RUN
HELP
FORM
_
______________________________ _
____________________ _
______________________________
Figure 13-4. The System Limits Form