ELRO HIS20S Security & home automation system EXPANDED USERS MANUAL - Manual (Page 41)

39
NOTIFICATION SETUP
Scroll through the programming menu until ‘5.
Notification Setup’ is displayed and press .
Note: After completing the Notification Setup press
to return to the top level programming menu.
TELEPHONE NUMBERS
Scroll through the menu until ‘5-1 Set TEL NO.’ is
displayed and press .
Scroll through the menu until the required Telephone
number (1-10) is displayed. The current setting of
each telephone number and text will also be displayed.
To change the setting press .
Input Text
To alter the name of TEL 1, enter the name (15
characters max.) by inputting letters of alphabet.
Press to toggle between alphabet and number.
Input NO.
Enter the required telephone number (32 digits. max.)
by inputting 0~9, *, #.
Press to move the cursor left.
Press to move the cursor right.
Press to delete the character under the cursor.
Press and hold to erase the entire phone number.
Delete
To delete the name and telephone number.
Press to delete the data, or
Press to retain the data.
Level Panic
When the Smart Home Box is triggered and the alarm
goes off, this feature, if enabled, allows the voice dialer
in the Smart Home Box dial to this phone number and
GSM Gateway send SMS to mobile phone number
simultaneously.
Default setting: ON
Press to enable the function of dialing and
sending SMS, or
Press to disable the function of dialing and
sending SMS.
Level 1
When the Smart Home Box is triggered but alarm will
not go off, this feature, if enabled, allows the voice
dialer in the Smart Home Box dial to this phone number
and GSM Gateway send SMS to mobile phone number
simultaneously.
Default setting: ON
Press to enable the function of dialing and
sending SMS, or
Press to disable the function of dialing and
sending SMS.
Level 2
When the Smart Home Box is triggered, alarm will not
go off and the voice dialer in the Smart Home Box will
not dial to this phone number. This feature, if enabled,
only allows GSM Gateway send SMS to mobile phone
number.
Default setting: ON
Press to enable the function of sending SMS,
or
Press to disable the function of sending SMS.
TEL CONFIRM TIMES
This sets the number of acknowledged phone numbers
will be required to report back to the Smart Home Box
in order to stop the voice dialer. For example, if it is
set to “2” then the dialing sequence will continue until
an acknowledgment is received from two different
numbers, (e.g. Phone No. 1 and Phone No. 3). The
recipient must acknowledge the message by pressing
the button on their telephone keypad.
Default setting: 1
Scroll through the menu until ‘5-2 TEL Confirm’ is
displayed. The current settings will also be displayed.
To change the setting press .