ELRO HIS20S Security & home automation system EXPANDED USERS MANUAL - Manual (Page 24)

22
display once the system is armed/disarmed by the
particular user. The maximum memorized capacity for
each user name is 15 digits.
Scroll through the menu until ‘:2 Name’ is displayed.
To change the setting press .
Enter the user name by using the Smart Home Box’s
keypad.
Press to save and exit, or
Press to exit without saving.
The table below lists the alphabets & no. on keypad:
Alphabet Number
. @ / : - _ → ^ 1
ABC abc 2
DEF def 3
GHI ghi 4
JKL jkl 5
MNO mno 6
PQRS pqrs 7
TUV tuv 8
WXYZ wxyz 9
# $ % * + < > ＜＞ = [ ] ←→ ` 0
! ? - , ' ; ( ) & " | ￥ *
#
Press to toggle between alphabet and number.
Press to move the cursor left.
Press to move the cursor right.
Press to delete the character under the cursor.
Press and hold to erase the entire phone number.
REMOTE SYSTEM CONTROL
This feature, if enabled, allows the system to be
remotely controlled via the telephone or SMS.
Scroll through the menu until ‘:3 TEL/SMS Remote’ is
displayed.
To change the setting press .
Press to enable the remote system control,
or
Press to disable the remote system control.
LATCHKEY REPORT
It is useful for a parent at work who wants to be sure
that his children have returned from school and have
disarmed the system. A special ‘latchkey’ message
will be sent out to the user of first telephone number
when the system is disarmed by a ‘latchkey user’.
Default setting: OFF
Scroll through the menu until ‘:4 Latchkey Report’ is
displayed.
Press to enable the function of latchkey
report, or
Press to disable the function of latchkey
report.
RECORD USER MESSAGE
This enables each user to record a short 3s message
for use with the latchkey facility. Once the system is
disarmed by one of the users, the system will send the
recorded message (e.g. system disarmed by user-1)
via PSTN to inform the user of first telephone number.
Scroll through the menu until ‘:5 Record User
Message’
is displayed.
To record a new message press .
Press to start the voice recorder, (max.
duration: 3s). Once completed, the recording will
automatically be played back, or
Press to exit without changing.
Note
: After recording the message, press to
stop the recorder and cancel any remaining message
time.
REPLAY USER MESSAGE
Scroll through the menu until ‘:6 Replay User
Message’
is displayed.
Press to replay the user message.
Press to exit.
CODE LEARNING FROM REMOTE CONTROL
The Smart Home Box can learn up to 8 remote controls.
This setting enables the Smart Home Box to learn the
specific code from each remote control.
Scroll through menu until ‘:7 Remoter’ is displayed
and press .