ELRO HIS20S Security & home automation system EXPANDED USERS MANUAL - Manual (Page 27)

25
Scroll through the top level programming menu until ‘2.
HOME BOX SETUP’
is displayed and press .
Note
: After completing the system setup press
to return to the top level programming menu.
ALARM DURATION
It sets the length of time alarm is on once the system is
triggered.
Default setting: 180s
Scroll through the menu until ‘2-1 Alarm Time’ is
displayed. The current setting will also be displayed.
To change the setting press .
Scroll through available options, (10SEC, 30SEC,
1MIN, 3MIN, 5MIN AND 10MIN)
until the required
setting is displayed and then
Press to save and exit, or
Press to exit without saving.
Note
: Following initiation of a Full Alarm condition the
External Siren will continue to sound until either the
system is disarmed; or the Smart Home Box Alarm
Duration Time expires.
Press to return to top level System Setup menu.
INTERNAL SIREN
To enable/disable the function of internal siren, scroll
through the menu until ‘2-2 INT. Siren’ is displayed.
The current setting will also be displayed.
Default setting: ON
To change the setting press .
Press to enable the Siren, or
Press to disable the Siren.
EXTERNAL SIREN
Wire Siren
To enable/disable the function of external siren
(connect via hard-wire), scroll through the menu until
‘:3-1 Wire Siren’
is displayed. The current setting will
also be displayed.
Default setting: ON
To change the setting press .
Press to enable the Hardwired Siren, or
Press to disable the Hardwired Siren.
Wireless Siren
Scroll through the menu until ‘:3-2 Wirefree Siren’ is
displayed and press .
Code Learning
The wireless siren has a row of 8 DIP switches. In
order to communicate with the Smart Home Box
properly, the house code for the wireless siren needs to
be learned by the Smart Home Box.
Scroll through the menu until ‘:2-1 Code setup’ is
displayed and press . Press the Smart Home
Box’s keypad 1-8 by selecting 0 or 1 respectively in
turn. (1 means the dip switch is set in ON position, 0 is
set in OFF position).
Press to save and exit, or
Press to exit without saving.
ENFORCEMENT FOR WIRELESS SIREN
Default setting: ON
Scroll through the menu until ‘:2-2 Siren Working’ is
displayed. The current setting will also be displayed.
To change the setting press .
Press to enable the Wireless Siren, or
Press to disable the Wireless Siren.
NIGHT ALARM
To avoid the alarm sound being disturbed the
neighborhood from 22:00 pm to 6:00 am when alarm is
triggered, this feature, if disabled, the Smart Home Box
will not initiate a full alarm condition during this period
of time.
Default setting: ON
Scroll through the menu until ‘:3-3 Night Alarm’ is
displayed.
To change the setting press .
Press to enable the alarm sound, or
Press to disable the alarm sound.