ELRO HIS20S Security & home automation system EXPANDED USERS MANUAL - Manual (Page 34)

32
Press to disable the Magnetic Contact
Detector.
AUTO REPORT
This feature, if enabled, allows the detector to give
feedback to the Smart Home Box periodically with its
latest status.
Default setting: ON
Scroll through the menu until ‘:9 Auto Report’ is
displayed. The current setting will also be displayed.
To change the setting press .
Press to enable Auto Report function, or
Press to disable Auto Report function.
SENSOR ZONE STATUS
This controls whether the detector is implemented on
the sensor zone.
Default setting: OFF
Scroll through the menu until ‘:10 Sensor status’ is
displayed. The current setting will also be displayed.
To change the setting press .
Press to enable the implementation of
Detector on the sensor zone, or
Press to disable the implementation of
Detector on the sensor zone.
Note: Once device learning is completed, the setting
will be set to ON.
SENSOR ZONE RESET
This feature, if enabled, allows the deletion of the
detector on the zone.
Scroll through the menu until ‘:11 Sensor Reset’ is
displayed.
Press to delete the setting of Detector on
the sensor zone, or
Press to keep the latest setting without
changing.
SIREN AT TRIGGER
This decides whether the Smart Home Box will sound
or become silent when the sensor is triggered.
Default setting: ON
Scroll through the menu until ‘:12 Siren at Trigger’ is
displayed. The current setting will also be displayed.
To change the setting press .
Press to enable the Sirens on the sensor zone,
or
Press to disable the Sirens on the sensor zone.