B&K Precision 2532B - Manual - Manual (Page 172)

172
Chapter 4 Message Prompts
and Troubleshooting
Message Prompts
• Trig level at limit! : Prompts you that the trigger Level is at a
limit when you turn the Trig level knob.
• Horizon position at limit! : Prompts you that the horizontal
position is at a limit when you turn the horizon position knob.
• Volts/Div at limit! : Prompts you that the vertical voltage have
already touched the Min 2MV/div or the Max 5V/div.
• Volts position at limit! : The system would display this
information when the vertical position is at a limit.
• Time/Div at limit! : Prompts that the Volts/Div is at full range
while turning the vertical scale knob.
• Holdoff time at limit! : Turn the “Universal” knob when holdoff
time has been to max or min value, now the system will clew this
information.
• Function isn’t useable! : Under several special modes, some
functions could not be running.