B&K Precision 2532B - Manual - Manual (Page 109)

109
Table 39 - All Measurement Function Menu
Option Setting Instruction
Source CH1
CH2 Select input signal channel.
Voltage On
Off Turn on the all measurement function to
measure voltage parameters.
Turn of the all measurement function to
measure voltage parameters.
Time On
Off Turn on the all measurement function to
measure Time parameters.
Turn of the all measurement function to
measure Time parameters.
Delay On
Off Turn on the all measurement function to
measure Delay parameters.
Turn of the all measurement function to
measure Delay parameters.
Return Return to the “All Measure main menu”.
Table 40 – Introduction of the Measure Type
Return Return to the first page of auto
measurement menu.
Measure Type Introduction
Vpp
Measures the absolute difference between the
maximum and minimum peaks of the entire
waveform.
Vmax
The most positive peak voltage measured over
the entire waveform.
Vmin
The most negative peak voltage measured
over the entire waveform.
Vamp
Voltage between Vhig and Vlow of a
waveform.
Measures the highest voltage over the entire
waveform.