B&K Precision 2532B - Manual - Manual (Page 141)

141
• At the bottom of the screen display “Press‘ RUN/STOP’ Key
Three Times to exit” information prompt to show that press
“RUN/STOP” three times to end test.
Figure 73 - Key Test Screen
LED Test
Select “LED Test” to enter the lighten interface, the on-screen lathy
rectangle shapes represent the front panel keys; the lathy rectangle shapes
represent the front panel knobs. The squares represent the knob presses for
scale knobs. The clew words “Press ‘SINGLE’ Key to continue , Press
‘RUN/STOP’ Key to exit is displayed, you could press the “Single” button
continuously for testing, when buttons are lighted ,the corresponding area
on the screen would display green (Color LCD) or white(Single LCD ).