B&K Precision 2532B - Manual - Manual (Page 164)

164
● The delta voltage (peak-to-peak voltage of the ringing)
● The voltage at Cursor A.
●
The voltage at Cursor B.
Figure 88 - Cursor Menu Screen 2
Capture a single event
To capture a single event, you need to gather some knowledge of the signal
in order to correctly set up the trigger level and slope. If you are not sure
about the instance of the signal, you can observe it through auto or normal
trigger mode to ensure the trigger level and slope will capture the signal.
The following steps show you how to use the oscilloscope to capture a
single event.