Atec Agilent-PNA-X Series User Manual
Agilent 2-port and 4-port pna-x network analyzer
Table of contents
Document Outline
- Documentation Warranty
- DFARS/Restricted Rights Notice
- Definitions
- Corrected System Performance
- System Dynamic Range and Receiver Dynamic Range
- Table 1. System Dynamic Range, Options 200 or 400, and Receiver Dynamic Range, All Options
- Table 2a. System Dynamic Range at Test Port (dB), Options 200 or 400
- Table 2c. System Dynamic Range at Test Port (dB), Option 224
- Table 2d. System Dynamic Range at Test Port (dB), Options 224 or 423
- Table 3a. Extended Dynamic Range at Direct Receiver Access Input (dB) - Typical
- Table 3b. Extended Dynamic Range at Direct Receiver Access Input (dB) - Typical
- N5241A, N5242A, and N5249A Corrected System Performance with 3.5mm Connectors, All Opts
- Uncorrected System Performance
- Test Port Output
- Table 8. Frequency Information, All Options
- Table 9a. Maximum Leveled Power (dBm), Options 200 or 400
- Table 9b. Maximum Leveled Power (dBm), Options 219 or 419
- Table 9c. Maximum Leveled Power (dBm), Option 219 or 419 with 0291
- Table 9d. Maximum Leveled Power (dB), Options 224 or 423
- Table 9e. Maximum Leveled Power (dBm), Options 224 or 423, Combine Mode - Typical
- Table 9f. Maximum Leveled Power (dBm), Option 224
- Table 9g. Maximum Leveled Power (dB), Options 224 or 423 with 0291
- Table 9h. Maximum Leveled Power (dBm), Options 224 or 423 with 0291, Combine Mode - Typical
- Table 10. Power Level Accuracy (dB) at Nominal Power1, All Options
- Table 11a. Power Level Linearity1 (dB), All Options - Specification
- Table 11b. Power Level Linearity1 (dB), All Options - Specification
- Table 11c. Power Level Linearity1 (dB), Option 224 - Specification
- Table 12a. Power Sweep Range (dB), Options 200 or 400
- Table 12b. Power Sweep Range (dB), Options 219 or 419
- Table 12c. Power Sweep Range (dB), Options 219 or 419 with 0291
- Table 12d. Power Sweep Range (dB), Options 224 or 423
- Table 12e. Power Sweep Range (dB), Option 224
- Table 12f. Power Sweep Range (dB), Options 224 or 423 with 0291
- Table 13. Nominal Power (Preset Power, dBm)
- Table 14. Power Resolution and Maximum/Minimum Settable Power, All Ports1
- Table 15. Harmonics at Max Specified Power (dBc), All Options - Typical
- Table 16. Non-Harmonic Spurs (dBc) at Nominal Power, All Options, All Ports - Typical
- Table 17. Phase Noise (dBc/Hz), All Options, All Ports - Typical
- Test Port Input
- Table 18. Noise Floor1 (dBm) at 10 Hz IFBW, All Options, All Ports
- Table 19. 0.1 dB Compression at Test Port (dBm), All Options, All Ports - Typical
- Table 20. Test Port Compression (dB) at 8 dBm Test Port Power, All Options, All Ports, - Specification
- Table 21a. Trace Noise1 Magnitude (dB rms), All Options, All Ports
- Table 21b. Trace Noise1 Phase (deg rms), All Options, All Ports
- Table 22. Reference Level - Specification
- Table 23. Stability1 - Typical
- Table 24. Damage Input Level - Specification
- Noise Receiver Input (Option 029 only)
- Dynamic Accuracy
- General Information
- Measurement Throughput Summary
- Specifications: Front-Panel Jumpers
- Table 40. Measurement Receiver Inputs (dBm) - Typical
- Table 41a. Reference Receiver Inputs and Reference Source Outputs (dBm) - Typical
- Table 41b. Reference Receiver Inputs and Reference Source Outputs (dBm) - Typical
- Table 41c. Reference Receiver Inputs and Reference Source Outputs (dBm) - Typical
- Table 42a. Source Outputs (dBm) - Typical
- Table 42b. Source Outputs (dBm) - Typical
- Table 43. Coupler Inputs (dB) - Typical
- Table 44. Damage Level - Typical
- Test Set Block Diagrams
- Figure 1. 2-Port N5241A, N5242A, and N5249A Base Unit Option 200
- Figure 2. 2-Port N5241A, N5242A, and N5249A Option 219
- Figure 3. 2-Port N5241A, N5242A, and N5249A Option 224
- Figure 4. 2-Port N5241A, N5242A, and N5249A Option 224 with 029
- Figure 5. 4-Port N5241A, N5242A, and N5249A Base Unit Option 400
- Figure 6. 4-Port N5241A, N5242A, and N5249A Option 419
- Figure 7. 4-Port N5241A, N5242A, and N5249A Option 423
- Figure 8. 4-Port N5241A, N5242A, and N5249A Option 423 with 029
- Figure 9. Receiver Block Diagram