Atec Agilent-PNA-X Series - Manual (Page 34)

34
Table 23. Stability 1 - Typical
Description Magnitude (dB/°C) Phase (°/°C)
10 MHz to 50 MHz 0.01 0.29
50 MHz to 500 MHz 0.01 0.06
500 MHz to 3.2 GHz 0.01 0.07
3.2 GHz to 8.5 GHz 0.02 0.13
8.5 GHz to 10 GHz 0.02 0.13
10 GHz to 13.5 GHz 0.02 0.13
13.5 GHz to 16 GHz 0.02 0.13
16 GHz to 20 GHz 0.03 0.40
20 GHz to 24 GHz 0.03 0.54
24 GHz to 26.5 GHz 0.04 0.56
1 Stability is defined as a ratio measurement made at the test port.
Table 24. Damage Input Level - Specification
Description RF (dBm) DC (V)
Test Port 1, 2, 3, 4 (All Options) > +30 40
Source 2 Out 1, Source 2 Out 2 (Option 224 only) > +30 0
Test Port 2, Noise Mode 1 (Option 029 only) > +27 40
1 Noise mode sets port 2 noise receiver switch to noise receiver position.