Atec Agilent-PNA-X Series - Manual (Page 49)

49
Table 38. Cycle Time vs. Number of Points
Applies to the Preset condition (correction off) except for the following changes:
 CF = 10 GHz
 Span = 100 MHz
 Display off (add 21 ms for display on)
Cycle time includes sweep and retrace time.
Description IF Bandwidth (Hz)
Number of Points 1,000 10,000 30,000 600,000
3 7.7 5.44 5.7 5.4
11 16.6 7.90 5.9 5.4
51 60 10.7 6.5 5.5
101 115 16.8 8.2 5.6
201 222 29.0 11.8 5.9
401 436 53.0 18.8 6.3
801 860 102 32.8 7.2
1,601 1,700 199 60.5 9.6
6,401 6,700 780 228 25
16,001 16,000 1950 566 56