Atec Agilent-PNA-X Series - Manual (Page 44)

44
Table 34. (Continued) Rear Panel Information, All Options
Description Typical Performance
RF Pulse Modulator Input (Source Modulator)
On/Off Ratio
10 MHz to 3.2 GHz -64 dB
3.2 GHz to 8.5 GHz -80 dB
8.5 GHz to 13.5 GHz -80 dB
13.5 GHz to 26.5 GHz -80 dB
Pulse Period
Minimum 20 ns
Maximum 70 s
Pulse Outputs
Voltage (TTL)
High: 3.3 V to 3.5 V
Low: <1 V
Impedance 50 Ohm
External Test Set Driver
Function Used for driving remote mixers
Connections SMA (female)
RF, LO Output Frequency
Range
1
1.7 to 13.5 GHz (N5241A)
1.7 to 26.5 GHz (N5242A)
Rear Panel LO Power Upper Limit (dBm) Lower Limit (dBm)
1.7 GHz to 8.5 GHz 0 -10
8.5 GHz to 13.5 GHz 0 -10
13.5 GHz to 18 GHz 0 -10
18 GHz to 22.5 GHz 2 -8
22.5 GHz to 26.5 GHz 6 -5
Rear Panel RF Power Upper Limit (dBm) Lower Limit (dBm)
3.2 GHz to 13.5 GHz -3 -8
13.5 GHz to 20 GHz -3 -8
20 GHz to 26.5 GHz -8 -14
1 Full LO frequency range is: 12.535 MHz to 13.5 GHz. (N5241A), 12.535 MHz to 26.5 GHz. (N5242A)