Atec Agilent-PNA-X Series - Manual (Page 45)

45
Table 34. (Continued) Rear Panel Information, All Options
Description Typical Performance
VGA Video Output
Connector 15-pin mini D-Sub; Drives VGA compatible monitors
Devices Supported: Resolutions:
Flat Panel (TFT) 1024 X 768, 800 X 600, 640 X 480
Flat Panel (DSTN) 800 X 600, 640 X 480
CRT Monitor 1280 X 1024, 1024 X 768, 800 X 600, 640 X 480
Simultaneous operation of the internal and external displays is allowed, but with 640 X 480 resolution only. If you
change resolution, you can only view the external display (internal display will "white out").
Bias Tee Inputs
Connectors BNC(f) for ports 1, 2, 3 and 4
Fuse 500 mA, bi-pin style
Maximum Bias Current +/-200 mA with no degradation of RF specifications
Maximum Bias Voltage +/-40 VDC
Trigger Inputs/Outputs BNC(f), TTL/CMOS compatible
Test Set IO 25-pin D-Sub connector, available for external test set control.
Power IO 9-pin D-Sub, female; analog and digital IO
Handler IO
36-pin parallel I/O port; all input/output signals are default set to negative logic; can
be reset to positive logic via GPIB command.
GPIB
Two ports - dedicated controller and dedicated talker/listener. 24-pin D-sub (Type D-
24), female; compatible with IEEE-488.
Parallel Port (LPT1)
25-pin D-Sub miniature connector, female; provides connection to printers or any other
parallel port peripherals
USB Port
Four ports on front panel (all Host) and five ports (four Host and one Device) on rear
panel. Type A configuration (eight Host) and Type B configuration (one Device), USB
2.0 compatible.
LAN 10/100BaseT Ethernet, 8-pin configuration; auto selects between the two data rates
Line Power
Frequency, Voltage
50/60/400 Hz for 100 to 120 VAC
50/60 Hz for 220 to 240 VAC
Power supply is auto switching
Max 450 watts