Atec Agilent-PNA-X Series - Manual (Page 48)

48
Table 36b. Cycle Time (ms) for Full-Span Measurement Completion - Typical
10 MHz to 26.5 GHz Number of Points
IF Bandwidth 201 401 1601 16001
600 kHz
Uncorrected 59 69 118 350
2-Port cal 125 147 244 707
10 kHz
Uncorrected 94 156 480 2333
2-Port cal 196 320 968 4674
1 kHz
Uncorrected 277 504 1873 17950
2-Port cal 561 1015 3756 35900
Table 37. Cycle Time vs. IF Bandwidth - Typical
Applies to the Preset condition (201 points, correction off) except for the following changes:
 CF = 10 GHz
 Span = 100 MHz
 Display off (add 21 ms for display on)
Cycle time includes sweep and retrace time.
Description Typical Performance
IF Bandwidth (Hz) Cycle Time (ms) Trace Noise
600,000 5.00 0.009
100,000 6.84 0.003
30,000 11.6 0.002
10,000 29.0 0.001
3,000 71.8 0.0007
1,000 222 0.0004
300 640 0.0003
100 1826 0.0002
30 5982 <0.0002
10 17830 <0.0002
3 60000 <0.0002