Atec Agilent-PNA-X Series - Manual (Page 51)

51
Specifications: Front-Panel Jumpers
Note: All PNA-X options have the following front-panel jumpers for each port.
 Measurement Receiver Inputs
 Reference Receiver Inputs and Reference Source Outputs
 Source Outputs
 Coupler Inputs
 Damage Level
Table 40. Measurement Receiver Inputs (dBm) - Typical
(RCVR A, B, C, D IN) @ 0.1 dB Typical Compression
Description All Options
10 MHz to 50 MHz -4
50 MHz to 500 MHz -3
500 MHz to 8.5 GHz -2
8.5 GHz to 13.5 GHz -2
13.5 GHz to 16 GHz -2
16 GHZ to 20 GHz -2.5
20 GHZ to 26.5 GHz -4
Table 41a. Reference Receiver Inputs and Reference Source Outputs (dBm) - Typical
(RCVR R1 IN, REF 1 SOURCE OUT) @ Max Specified Output Power
Description Options 200, 400 Options 219, 419 Options 224, 423
Filtered
Mode 1
Hi Power
Mode 1
Filtered
Mode 1
Hi Power
Mode 1
Filtered
Mode 1
Hi Power
Mode 1
10 MHz to 50 MHz -8 -3 -8 -3 -9 -6
50 MHz to 500 MHz -6 -3 -6 -3 -7 -5
500 MHz to 3.2 GHz -6 -6 -5 -5 -7 -5
3.2 GHz to 8.5 GHz -3 -3 -2 -2 -2 -2
8.5 GHz to 10 GHz -3 -3 -2 -2 -2 -2
10 GHz to 13.5 GHz -4 -4 -3 -3 -3 -3
13.5 GHZ to 16 GHz -4 -4 -3 -3 -3 -3
16 GHZ to 20 GHz -5 -5 -6 -6 -6 -6
20 GHZ to 24 GHz -7 -7 -8 -8 -9 -9
24 GHZ to 26.5 GHz -16 -16 -15 -15 -18 -18