Atec Agilent-PNA-X Series - Manual (Page 8)

8
Table 1. System Dynamic Range, Options 200 or 400, and Receiver Dynamic Range, All Options
Description Specification, Options 200, 400 Typical, All Options
System
Dynamic
Range (dB)
(A)-(B)
Max Leveled
Output
Power
(dBm)
(A)
Test Port
Noise
Floor
(dBm)
(B)
Receiver
Dynamic
Range (dB)
(C)-(D)
Test Port
Compression
at 0.1 dB
(dBm)
(C)
Test Port
Noise
Floor
(dBm)
(D)
Ports 1,3 1 Ports 1,3 1 All Ports All Ports All Ports All Ports
10 MHz to 50 MHz 93 13 -80 -- -- -87
50 MHz to 100 MHz 103 13 -90 -- -- -95
100 MHz to 500 MHz 117 13 -104 125 15 -110
500 MHz to 3.2 GHz 124 10 -114 130 13 -117
3.2 GHz to 8.5 GHz 127 13 -114 130 13 -117
8.5 GHz to 13.5 GHz 127 13 -114 130 13 -117
13.5 GHz to 16 GHz 127 13 -114 130 13 -117
16 GHz to 20 GHz 127 13 -114 129 12 -117
20 GHz to 24 GHz 122 12 -110 125.5 10.5 -115
24 GHz to 26.5 GHz 112 5 -107 123 10 -113
1 Either port can be used as the source port. Any other port can be used as the receiver port.
Table 2a. System Dynamic Range at Test Port (dB), Options 200 or 400
Description Specification Typical
Ports 1, 3 1 Ports 2, 4 1 Ports 1, 3 1 Ports 2, 4 1
10 MHz to 50 MHz 93 93 106 104
50 MHz to 100 MHz 103 103 116 115
100 MHz to 500 MHz 117 117 131 130
500 MHz to 3.2 GHz 124 127 130 135
3.2 GHz to 8.5 GHz 127 127 137 136
8.5 GHz to 10 GHz 127 127 137 136
10 GHz to 13.5 GHz 127 127 134 133
13.5 GHz to 16 GHz 127 127 134 133
16 GHz to 20 GHz 127 124 133 129
20 GHz to 24 GHz 122 117 130 126
24 GHz to 26.5 GHz 112 109 124 120
1 Either port can be used as the source port. Any other port can be used as the receiver port.