Atec Agilent-PNA-X Series - Manual (Page 50)

50
Table 39. Data Transfer Time 1 (ms) - Typical
Description Number of Points
201 401 1601 16,001
SCPI over GPIB (Program executed on external PC 2 )
32-bit floating point 5.6 10.5 39.9 400
64-bit floating point 10.5 20.3 79.2 788
ASCII 46 92.5 370 3702
SCPI over SICL/LAN or TCP/IP Socket (Program executed in the analyzer)
32-bit floating point 0.18 0.21 0.5 3.6
64-bit floating point 0.22 0.28 0.62 5.3
ASCII 6.3 12.3 47.3 470
COM 3 (Program executed in the analyzer)
32-bit floating point <0.15 0.15 0.2 0.7
Variant type 0.75 1.2 4.5 50
DCOM over LAN 3 (Program executed on external PC)
32-bit floating point <1.0 1.2 2.1 13
Variant type 2.7 4.5 15 150
1 Measured with the analyzer display off. Values will increase slightly if the analyzer display is on.
2 Measured when using the SCPI command DISPlay: VISible OFF.
3 Values are for real and imaginary pairs, with the analyzer display off.
Note: Specifications for Recall & Sweep Speed are not provided for the N5241A, N5242A, and N5249A analyzers.