Atec Agilent-PNA-X Series - Manual (Page 16)

16
Table 6. N4691B 2-Port Electronic Calibration Module
Description Specification (dB)
10 MHz to
50 MHz
50 MHz to
500 MHz
500 MHz to
2 GHz
2 GHz to
8.5 GHz
8.5 GHz to
13.5 GHz
13.5 GHz to
20 GHz
20 GHz to
26.5 GHz
Directivity 46 46 52 46 46 46 44
Source
Match
41 41 47 42 42 42 40
Load Match 40 40 46 41 41 40 38
Reflection Tracking
Mag
±0.050 ±0.050 ±0.020 ±0.040 ±0.040 ±0.040 ±0.050
Phase (°)
±0.330 ±0.330 ±0.132 ±0.264 ±0.264 ±0.264 ±0.330
Transmission Tracking without Option 029
Mag
±0.062 ±0.056 ±0.023 ±0.054 ±0.054 ±0.055 ±0.072
Phase (°)
±0.410 ±0.370 ±0.152 ±0.354 ±0.354 ±0.365 ±0.473
S
21
Transmission Tracking with Option 029 1
Mag
±0.065 ±0.060 ±0.028 ±0.063 ±0.063 ±0.063 ±0.079
Phase (°)
±0.431 ±0.394 ±0.183 ±0.416 ±0.416 ±0.416 ±0.521
S
12
Transmission Tracking with Option 029 1
Mag
±0.085 ±0.068 ±0.029 ±0.061 ±0.061 ±0.064 ±0.078
Phase (°)
±0.559 ±0.446 ±0.193 ±0.400 ±0.400 ±0.421 ±0.517
The port 1 noise tuner switch set to the bypass position, and port 2 noise receiver switch set to the normal position.