Atec Agilent-PNA-X Series - Manual (Page 22)

22
Table 9b. Maximum Leveled Power (dBm), Options 219 or 419
Description Specification Typical
Ports 1, 3 1 Ports 2, 4 1 Ports 1, 3 1 Ports 2, 4 1
Filt. Mode 2 Hi Pwr Mode 2 Filt. Mode 2 Hi Pwr Mode 2
10 MHz to 50 MHz 8 13 13 10 19 17
50 MHz to 500 MHz 10 13 13 11 20 19
500 MHz to 3.2 GHz 10 10 13 11 13 18
3.2 GHz to 8.5 GHz 13 13 13 18 18 17
8.5 GHz to 10 GHz 13 13 13 18 18 17
10 GHz to 13.5 GHz 12 12 11 15 15 14
13.5 GHz to 16 GHz 12 12 11 15 15 14
16 GHz to 20 GHz 10 10 8 13 13 10
20 GHz to 24 GHz 8 8 7 12 12 9
24 GHz to 26.5 GHz 3 3 -1 8 8 4
1 Either port can be used as the source port.
2 In Filtered Mode, the signal path goes through filters to minimize harmonics below 3.2 GHz. In Hi Power Mode, the
signal bypasses the filters to maximize output power.
Table 9c. Maximum Leveled Power (dBm), Option 219 or 419 with 029 1
Description Specification Typical
Port 1 Port 2 Port 1 Port 2
Filt. Mode 2 Hi Pwr Mode 2 Filt. Mode 2 Hi Pwr Mode 2
10 MHz to 50 MHz 7 12 13 9 18 17
50 MHz to 500 MHz 9 12 13 10 19 19
500 MHz to 3.2 GHz 9 9 13 10 12 18
3.2 GHz to 8.5 GHz 12 12 13 17 17 17
8.5 GHz to 10 GHz 12 12 13 17 17 17
10 GHz to 13.5 GHz 12 12 9 15 15 12
13.5 GHz to 16 GHz 12 12 9 15 15 12
16 GHz to 20 GHz 10 10 5 13 13 7
20 GHz to 24 GHz 8 8 2 12 12 4
24 GHz to 26.5 GHz 3 3 -2 8 8 3
1 Option 029 affects port 1 and port 2 maximum leveled power. Refer to Table 9b for other ports.
2 In Filtered Mode, the signal path goes through filters to minimize harmonics below 3.2 GHz. In Hi Power Mode, the
signal bypasses the filters to maximize output power.