Extron Electronics VN-COMMANDER - Manual (Page 75)

I456GB issue 8 65
VN-COMMANDER User Guide Section 2: System Configuration
TimeFormat
Select either 12 hour time format or 24 hour.
Default is 24.
ShowSeconds
When set to True the time display will include
hours, minutes and seconds.
When set to False the time display will show
hours and minutes only.
ShowDate
When set to True the date is displayed along
with the time.
When set to False only the time is displayed.
DateFormat
Set the format of the date displayed from the
following options:
dd/mm/yyyy (default)
mm/dd/yyyy
20 June 2006
June 202006
ShowWeekDay
When set to True the day of the week is
displayed (Monday to Saturday) with the date.
When set to False only the date is displayed.
TimerStartTime
When operating in Timer mode, this value
defines the start time in hh:mm:ss.
Default is 00:00:00.
Note: When zero is reached in count down mode,
the timer reloads with this preset value and starts
again.
ClockMode
Choose whether the display will show a
standard Clock (default) or a Timer.
Note: For timer mode, set the TimerCountDirection
parameter as required (see below).
TimeZone
Sets the time zone (from the drop down list) for
the clock and date.
Alignment
Sets the horizontal alignment of the display,
relative to the window in which it is placed.
Left
Center (default)
Right