Extron Electronics VN-COMMANDER User Manual
Page 40
Section 2: System Configuration
VN-COMMANDER User Guide
30
I456GB issue 8
~
If the display devices are overscanned, you can set the
amount of compensation required by using the Overscan
controls.
~
If you are using projectors with soft edge blending, you
can set the amount of overlap required by using the Screen
Overlap controls.
~
When you have completed setting-up the new layout, click on
the OK button to save it.
~
The new layout can now be selected using the Choose Layout
task (see page 26). You will then need to map screens to
processor outputs (see page 27).
VN-COMMANDER CONNECT does not support the
use of overscan or overlapped displays.