Extron Electronics VN-COMMANDER - Manual (Page 37)

I456GB issue 8 27
VN-COMMANDER User Guide Section 2: System Configuration
Choosing &
Configuring a Layout
~
From the layout diagrams displayed, click on the
layout that matches the arrangement of your target
display screens.
The currently selected layout is highlighted with a blue
background and red outline.
Mapping Screens to
Processor Outputs ~
Right-click on a screen (usually starting with the top
left screen) in the chosen layout.
~
From the popup menu that appears choose Change
Screen Processor IP.
The following dialog will appear:
~
Select the IP address of the Processor you are using
from the Processor IP listbox.
This will list all processors currently ‘connected’ to VN-
COMMANDER via the Choose Display Processors task.
If no processors are listed you will need to ‘connect’ to
one as described on page 25.
If the default layouts don’t match your particular display
configuration, see Designing a New Layout on page 28 or
Modifying an Existing Layout on page 30.