Extron Electronics VN-COMMANDER User Manual
Page 20
Section 1: Getting Started
VN-COMMANDER User Guide
10
I456GB issue 8
Setting the IP Address
(Windows 2000)
~
Right-click on the My Network Places icon on the
Windows desktop.
~
From the popup menu that appears choose
Properties.
The Network & Dial-up Connections window will appear.
~
Right-click on the Local Area Connection icon.
~
From the popup menu that appears choose Properties.
The Local Area Connection Properties dialog box will
appear.
~
In the list of loaded components double-click on the
Internet Protocol (TCP/IP) entry.
The Internet Protocol (TCP/IP) Properties will appear.
~
Click on the 'Use the following IP address' option
and type-in the required IP Address and Subnet
Mask.
HINT:
Remember that you can, if preferred, change the IP
Address of the VN-QUANTUM Processor to suit that of
the computer.
For further information and advice on choosing these
values, refer to ‘Appendix A – IP Addressing’.
~
Click on the OK button to action the changes (or
Cancel to retain the existing settings).
~
Restart the computer to implement the new settings.