Extron Electronics VN-COMMANDER - Manual (Page 29)

I456GB issue 8 19
VN-COMMANDER User Guide Section 1: Getting Started
Using the Auto-Backup Function
VN-COMMANDER can automatically backup your presentation at
specific intervals.
In the event that any changes are lost before saving
(e.g. due to a power outage), you may be able to limit the amount of work you
have lost by restoring the last auto-backup file.
Setting the
Backup Timer
~
From the menu bar, choose Backup | Setup Backup
Timer.
The Backup Setup dialog box will appear:
~
Ensure that the Disable Backup box is deselected
(unchecked) to enable auto-backup.
If you do not want to use auto-backup, ensure that the
Disable Backup box is selected (checked).
~
Set the desired interval between backups using the
Hours and Minutes fields.
~
Using the Backup Folder area, type in the full path of
the Windows folder where the backup files are to be
saved. By default these will be saved in the VN-
COMMANDER folder. Alternatively, click the Browse
button to find a specific folder.
~
Click the OK button to implement the new settings.