Extron Electronics VN-COMMANDER User Manual

Page 38

Section 2: System Configuration

VN-COMMANDER User Guide

I456GB issue 8

Fig.3: Example display layouts and channel configurations.

Click on Available Outputs to see a list of currently

unassigned output cards (by slot number) and choose
one to assign to this screen.

IMPORTANT NOTE:

There are two output channels on each

Output Card and choosing from the Available Outputs list
assigns the primary output (channel 1) to the screen. The
secondary output (channel 2) is assigned automatically
using the Second Output setting. (See Fig.3 for examples.)

In the Second Output area, select how you want the

secondary output to be assigned. Choose from:

•

• Horizontal – the secondary output is assigned to

the screen immediately to the right of the primary
output (when viewed from the front of the display).

•

• Vertical – the secondary output is assigned to the

screen immediately below the primary output.

•

• Don’t Assign – the secondary output is not

assigned; the primary output only is used.

Click OK to confirm the assignments.

NOTE:

Screens that have been assigned/mapped will appear

with a green background in the layout diagram.
Unassigned screens have a grey background.

Channel
Number

Card Slot
Number