Extron Electronics VN-COMMANDER - Manual (Page 64)

Section 2: System Configuration VN-COMMANDER User Guide
54 I456GB issue 8
Server
Specifies the network Name* or IP Address of
the VN-GLIMPSE source.
*For VN-GLIMPSE Server, this is the name of the
host/source computer. For VN-GLIMPSE RGB
Adapter, this is the name of the RGB Adapter itself.
To use names the network must support DNS
(Dynamic Name Services).
For example, to select a VN-GLIMPSE Server
source on a PC called GlimpsePC with an IP
address of 172.28.229.101, enter either:
GlimpsePC or 172.28.229.101
IPAddress
The IP address of the VN-GLIMPSE RGB
Adapter where the source is connected.
Must be left blank if the Adapter is using DHCP.
Multicast
Address
If the source is a VN-GLIMPSE RGB Adapter
operating in Multicast mode, enter its Multicast
address here. For example: 234.5.6.183
MulticastPort Default = 5000
Input Enabled NOT IMPLEMENTED.
Input Stop
Keystroke
NOT IMPLEMENTED.
Input Timeout
(Seconds)
NOT IMPLEMENTED.
Reconnection
Time (Seconds)
NOT IMPLEMENTED.