Extron Electronics VN-COMMANDER - Manual (Page 140)

Appendix B: Serial Commands VN-COMMANDER User Guide
130 I456GB issue 8
Command
ASCII Hex
Generic R-type
Command Name VN-COMMANDER
Function Header
37 33 37 Set Window Style ID
Applies a pre-defined
style to a window.
(see note 4)
Defines the
window and style
ID in the following
format:
WWWWStyleID
(see note 5)
38 33 38 Set Window Border Text Displays the specified
text on a window
border.
(see note 4)
Defines the
window and text in
t h e f o l l o w i n g
format:
WWWWTextString
(see note 5)
39 33 39 Set Window Overlay Text Displays the specified
text on a window
overlay.
(see note 4)
Defines the
window and text in
t h e f o l l o w i n g
format:
WWWWTextString
(see note 5)
41 34 31 Start Collect sequence Start of Collect and
execute, will disable
immediate sending of
scene to VNQuantum
until command 42 is
sent. N/A
42 Action Collect sequence End collect and
execute, will cause a
send of the current
scene to VN-
Quantum, resets
command 41. N/A
51 Create / Add / remove
merged scene Create a ‘merged
scene’ and Add and/or
Remove scenes from
Merged Scene
Comma separated
string with the
following
parameters:
1 – Merge Scene
Name
2 – Scene to
Remove
3 – Scene to Add
4 – Display (1 to
update
52 Set window source Change window
source in a specified
scene. Comma separated
string with the
following
parameters:
1 – Scene Title
2 – Window Index
(0 based)
3 – Source Name