Extron Electronics VN-COMMANDER User Manual
Page 48
Section 2: System Configuration
VN-COMMANDER User Guide
38
I456GB issue 8
XML Device Drivers
Device drivers are defined by an XML file, located in
the following folder on the computer’s hard disk:
“C:\Program Files\Electrosonic\VNCommander\XML\Device Drivers”
For further advice on creating an XML device driver file,
please contact Electrosonic Product Support.
To enable XML Device Drivers...
~
Open the Settings folder and click the XML
Driver Path item.
~
An Enable XML device drivers checkbox will
appear on the right-hand side of the screen. Check
this box to load the device drivers.
A message box will appear while VN-COMMANDER
loads the drivers after which the driver names will
appear in the Ethernet Devices and/or Serial Devices
folders.