Extron Electronics VN-COMMANDER - Manual (Page 139)

I456GB issue 8 129
VN-COMMANDER User Guide Appendix B: Serial Commands
Command
ASCII Hex
Generic R-type
Command Name VN-COMMANDER
Function Header
0= 30 3D Run Current Show
Starts AutoPlay,
commencing with the
first scene in the scene
list.
not used
0> 30 3E Continue Current Show
Starts (or continues)
AutoPlay from the
currently selected
scene.
not used
0? 30 3F Pause Current Show Stops AutoPlay. not used
0n 30 6E Next Scene
Selects the next scene
in the scene list.
not used
0p 30 70 Previous Scene
Selects the previous
scene in the scene list.
not used
0+ 30 2B Increase Speed
Increases the AutoPlay
playback speed by 10%.
not used
0- 30 2D Decrease Speed
Decreases the AutoPlay
playback speed by 10%.
not used
31 33 31 Set Window Source Displays the specified
source in the specified
window for the current
scene.
(see note 4)
Defines the
window and source
number in the
following format:
WWWWPPSSS
(see note 5)
33 33 33 Set Window Visibility Displays or hides the
specified window for
the current scene.
(see note 4)
D e f i n e s t h e
window visibility
state in the
following format:
WWWWD
(see note 5)
34 33 34 Set Window Zoom/Pan Selects a different
viewport for the
current scene.
(see note 4)
Defines the
window, zoom and
pan factors in the
following format:
WWWWZZZHHHVVV
(see note 5and the
last example on page
132).
36 33 36 Set Source by Name Selects a source for a
specified window by
the souce name.
(see note 4)
Defines the window
and source name in
the following
f o r m a t :
WWWWSourceName
(see note 5)