Extron Electronics VN-COMMANDER - Manual (Page 34)

Section 2: System Configuration VN-COMMANDER User Guide
24 I456GB issue 8
Choosing a Display Processor
VN-COMMANDER communicates with the
VN-QUANTUM via a direct or indirect Ethernet
connection (as described on page 6).
Before VN-COMMANDER can take control of a
VN-QUANTUM Processor, it must be detected and
‘connected’ using the Choose Display Processors task.
~
Click on the Choose Display Processors icon in the
task bar:
The Choose Display Processors workspace will appear.
~
Click on the button on the toolbar, or choose the
Detect option from the Detect menu.
V N - C O M M A N D E R w i l l t h e n p o l l f o r a n y
VN-QUANTUM Processors accessible via its Ethernet port.
An information panel is displayed for each Processor
detected, as in the following example:
The type of image processor is
shown here, e.g. VNQuantum.
The IP Address of the detected
Processor. This is for information only
and cannot be changed here.
A text box for entering an optional
Name for the Processor.
A Connect checkbox, used to enable or
disable communications between this
Processor and VN-COMMANDER.
Detecting the
Display Processor(s)