Extron Electronics VN-COMMANDER - Manual (Page 68)

58 I456GB issue 8
Section 2: System Configuration VN-COMMANDER User Guide
Filename
The filename of the required image, including
its path.
For example, to select a file on the VN-
QUANTUM Processor, use the format:
d:/pictures/companylogo.jpg
Alternatively, to select a file on a network
computer/server, use the format:
\ \ imageserver\ companylogo.jpg
The IP address of the VN-QUANTUM card
frame where the source is connected.
This value can be entered manually or detected
by using the Detect Sources button (see Helpful
Location
Hint on page 48).
Set to True to make the specified KeyColour in
the image become transparent.
GraphicsOverlay
Set to False to disable transparency (KeyColour
will be opaque).
Sets the colour in the image that will be made
transparent (if Graphics Overlay is set to True).
Three values from 0 to 255 are used to set the
Red, Green and Blue levels.
For example:
255,255,255 = White
0,0,0 = Black
KeyColour
0,0,255 = Blue
VN-COMMANDER CONNECT does not support the
use of Picture sources.