Extron Electronics VN-COMMANDER - Manual (Page 14)

Section 1: Getting Started VN-COMMANDER User Guide
4 - I456GB issue 8
Image Processing
Hardware VN-COMMANDER is designed to be used in
conjunction with a VN-QUANTUM Image Display
Processor.
The VN-QUANTUM hardware comprises a card
frame into which various input/output cards are
installed.
For further details on the VN-QUANTUM, including
connector pin-outs and processing capability, please
refer to the VN-QUANTUM User Guide (part no.
I455GB).
Except for defining an IP Address, it is not necessary to
perform any set-up procedures using the VN-
QUANTUM itself. All other system configuration
is achieved through VN-COMMANDER.
Software Installation
~
Insert the VN-QUANTUM System Disc into the
CD-ROM drive on the computer.
After afew seconds a disc browser should
automatically start.
~
Choose the Install option in the VN-COMMANDER
section. The on-screen instructions will guide you
through the rest of the installation process.
If the disc browser does not run automatically or if you have the
Windows auto-play feature disabled, proceed as follows: