Extron Electronics VN-COMMANDER - Manual (Page 125)

I456GB issue 8 115
VN-COMMANDER User Guide Section 4: Viewing a Presentation
Changing the Display Time for a Scene
You can choose whether or not a scene is included in an
AutoPlay presentation and how long it is displayed for
by using the Scene Properties dialog.
~
For the current scene, click on the button on
the Scene toolbar, or for any scene right-click on the
scene title in the Scene List.
The Scene Properties dialog will appear:
~
Modify the settings as required, then click on the OK
button.
Set the amount of time that the scene is
displayed by adjusting this value. For example:
1 0 0 0 = 1 s e c o n d
1500 = 1.5 seconds
10000 = 10 seconds
25000 =25 seconds
60000 = 60 seconds
Select (check) this check
box to include the scene in
an AutoPlay presentation.
Deselect (uncheck) to
exclude the scene.