Extron Electronics VN-COMMANDER - Manual (Page 112)

Section 4: Viewing a Presentation VN-COMMANDER User Guide
102 I456GB issue 8
Full Screen Mode
The Scene Controller can also be operated in full screen mode,
in which only the workspace area (containing the scene select
buttons) is visible.
When full screen mode is active, the scene controller is
automatically switched to run view and access to all setup
tasks is disabled. This mode is useful when VN-
COMMANDER is to be controlled via a touch screen.
During a normal VN-COMMANDER session, full screen
mode can be activated from the scene controller as
follows:
~
To return to normal screen mode, press the Esc key
on the keyboard.
Start Up in
Full Screen Mode
VN-COMMANDER can also be made to open directly
to full screen mode from start up. To do this you need
to create a Windows shortcut and specify a ‘switch’ on the
command line.
~
Minimize (or close) VN Commander and any other
Windows applications so you can see the
Windows desktop.
~
Create a new Windows shortcut, e.g. by right-
clicking the Windows desktop and selecting New
| Shortcut.
The Create Shortcut dialog will appear (see next page).
~
Click on the button on the View toolbar.