Extron Electronics SMD 101 User Guide - Manual (Page 79)

Command
ASCII Command
(host to unit) Response
(unit to host) Additional
Description
SNMP (Simple Network Management Protocol)
SNMP unit contact
Set unit contact E C X60% SNMP} Snmp C* X60%] Sets the unit contact
to
X60% .
Set unit contact to
default
E C • SNMP} Snmp C* Not• Specified] Sets the unit contact to the
default setting.
View unit contact E CSNMP} X60%] View the unit contact.
SNMP unit location
Set unit location E L X60^ SNMP} Snmp L* X60^] Sets the unit location
to
X60^ .
Set unit location to
default
E L • SNMP} Snmp L*Not • Specified] Sets the unit location to the
default setting.
View unit location E LSNMP } X60^] View the unit location.
SNMP passwords
Set public password E P X60&SNMP} Snmp P* X60&] Sets public password
to
X60& .
Set public password
to default
E P • SNMP} SnmpP*public] Sets community password
to the default.
View public
password
E PSNMP} X60&] View the public password.
Set private password E X X60*SNMP} SnmpX* X60*] Sets private password
to
X60* .
Set private password
to default
E X • SNMP} Snmp X*private ] Sets private password to
the default setting.
View private
password
E XSNMP } X60*] View the private password.
SNMP access enable
Enable SNMP
access
E E1SNMP } Snmp E*1] Enable SNMP access.
Disable SNMP
access
E E0SNMP } Snmp E*0] Disable SNMP access.
View SNMP state E ESNMP } X51) ] View the SNMP access
setting.
NOTES:
X51) = 0 = Off or disable
1 = On or enable
X60% = SNMP contact name text, up to 64 characters (default=" not specified ")
X60^ = SNMP location, up to 64 characters (default=" not specified ")
X60& = SNMP public password, up to 64 characters (default=" public ")
X60* = SNMP private password, up to 64 characters (default=" private ")
Command and Response Table for Basic SIS Commands (continued)
73 SMD 101 • Remote Communication and Control