Extron Electronics SMD 101 User Guide User Manual
Page 52
•
Dropped
Packets:
— Total dropped packets for the current source since playback of
the stream started.
•
Dropped
%:
— Total percentage of dropped packets for the current source since
playback of the stream started.
•
Jitter:
— For transport streams, audio and video streams are combined for this
value.
•
Audio
Jitter:
— For elementary streams, the audio stream jitter in milliseconds.
•
Video
Jitter:
— For elementary streams, the video stream jitter in milliseconds.
The data in all current stream catagories resets automatically when a new stream is selected
or when play stops.
The
Total
panel displays a running total of raw network statistics from the interface for all
streams, files, or clips played since the last manual reset including:
•
Collisions:
— Always zero for full duplex links.
•
Rx_Bytes:
— Receive data statistics.
•
Rx_dropped:
— Receive data statistics.
•
Rx_errors:
— Receive data statistics.
•
Rx_packets:
— Receive data statistics.
•
Tx_Bytes:
— Transmit data statistics.
•
Tx_dropped:
— Transmit data statistics.
•
Tx_errors:
— Transmit data statistics.
•
Tx_packets:
— Transmit data statistics.
Press
Reset
Totals
to return the values in the
Total
panel to zero. The information
monitoring begins automatically after each reset.
Device Status panel
Device Status panel — Monitors general operating conditions including:
•
Power
Mode:
— Operating or standby.
•
Temperature:
— Current internal temperature of the device. Readings above 60°C
could indicate excessive ambient termperature or insufficient ventilation and should be
investigated.
•
Processor
Usage:
— A general indication of the device workload.
•
Memory
Usage:
— Provides an indication of volatiile memory usage. It is typically 15%
after a power cycle, and expected to approach 100% after playing large clips from
shared network folders.
•
Up
Time
(operating)
Hours:
— The time in days, hours, and minutes since the
SMD 101 was powered up or reset.
Local Storage panel
The
Local Storage panel provides about the user accessible non-volatile storage including:
•
Type
— Internal
•
Name
— User Content (can not be changed)
•
Total
— Total size of the internal non-volatile storage in megabytes.
•
Used
— Size of the files currently in local storage in megabytes.
•
Available
— Currently unallocated drive space.
NOTE:
Used
plus
Available
may not exactly add up to the
Total
size due to system
requirements.
SMD 101 • Web-based User Interface
46