beautypg.com

Extron Electronics SMD 101 User Guide User Manual

Page 76

background image

Command

ASCII Command
(host to unit)

Response
(unit to host)

Additional

Description

Direct access port

Set direct access

port map

E

[port#]MD }

Pmd [port#]

]

Set serial pass-through port
number.

Reset direct access

port map

E 2001MD }

Pmd 2001

]

Reset serial pass-through
port.

Disable direct access

port

E 0MD }

Pmd 00000

]

Disable serial pass-through
port.

View direct access

port map

E MD }

[port#]

]

View serial pass-through
port.

Restart network

Restart network

E 2BOOT}

2BOOT

]

NOTE: Changes made to the IP address, subnet mask, HDCP, host name, and gateway address do not take effect on

Linux systems until the 2BOOT command is issued.

Changes made using the CISG command take place immediately.

Command and Response Table for Basic SIS Commands (continued)

70

SMD 101 • Remote Communication and Control