Extron Electronics SMD 101 User Guide User Manual
Page 44
The files are saved to the host computer downloads folder and also saved to the SMD 101
local memory nortxe-backup folder.
Figure 35.
Configuration Files
NOTES:
•
Using Firefox or Chrome, the config files are automatically named
box.cfg
and
ip.cfg
and saved to both the SMD 101 local memory (in the
nortxe‑backup
folder( and to the host computer downloads folder (or designated location if
changed). From the host computer, they can be renamed or moved to a folder
selected by the user with a standard file browser.
•
Using MS Internet Explorer, after saving the files to local memory, the browser
remains on a page with only the configuration text displayed. Press the back
button to return to the Player page.
•
IE does not save the config files to the host computer. You must save the file using
cut and paste from the open web browser page, or extract the locally saved files
from the SMD 101 local memory to the host computer (see
To upload a configuration file to the same or another SMD 101:
1.
Select
a
configuration
file
to
upload:
— This field displays the location of the
configuration file for cloning a SMD 101, or to reload a custom configuration for a
specific task. Click
Browse
to locate and select the file from the host computer or local
memory.
2.
Upload:
— Click
Upload
to begin the configuration change with the selected file.
Cancel
stops the update and clears the
Browse
field.
After a configuration file (
box.cfg
or
ip.cfg
) is uploaded, the SMD 101 automatically
restarts and applies the changes. The process takes about a minute.
SMD 101 • Web-based User Interface
38