Ir remote control, Ogram selection (see – Extron Electronics SMD 101 User Guide User Manual
Page 62
The optional handheld IR remote control provides selection of pre-defined streams and
files, and direct control over playback. Features include standard transport controls for play,
pause, and stop. Up to 99 pre-configured channels can be directly accessed using the digit
buttons.
The following list details the available functions.
POWER — Toggles the SMD 101 power on and off.
CHANNEL — Steps up or down through the channel list from
the last selected channel.
VOLUME — Increase and decrease output volume to a display
device connected to the SMD 101 (see
on page 9).
Digits — Provides direct selection of up to 99 pre-defined
channels (see
AV MUTE — Mutes both the outgoing audio and video but
allows a stream to continue playback.
INFO — Launches an onscreen display with details of
the currently active stream (see
page 31).
ENTER — After channel entry using direct selection (see
Digits
, above) the entry is accepted after a short delay.
Press
Enter
after the channel entry to change to the channel
immediately.
VIDEO MUTE — Mutes and unmutes only the video output.
AUDIO MUTE — Mutes and unmutes only the audio output.
PROGRESS — Provides real-time information of the current
playback stream in the on-screen display of a connected
display. It includes the total play time of the stream and the
current position of playback. The on-screen display duplicates
the player controls (see
TRANSPORT CONTROL — Provides remote access of the
player controls panel (see
including:
•
PLAY — Begins normal playback of the selected stream or
file.
•
PREV — When a playlist is loaded, returns to the previous track.
•
PAUSE — Pauses the current playback freezing the last decoded frame.
•
NEXT — When a playlist is loaded, moves to the next track.
•
LOOP — Places the currently selected clip or playlist into an endless loop.
•
STOP — Stops the playback of the current source.
IR Remote Control
SMD 101 • IR Remote Control
56