Extron Electronics SMD 101 User Guide User Manual
Page 47
When an admin password and user password are both set, logging in with the user ID and
password limits access. Full player control is allowed, but configuration options are limited
including:
Player Page:
•
Create a new playlist, but cannot modify or delete an existing playlist.
•
Full player control
•
Use play, stop, pause, loop, go to previous or following buttons
•
Select items to play from input streams, files, channels, favorites, history lists,
playlists
Configuration Page:
•
Video, Audio, and OSD panels — Full Access
•
Automation — View Only Access (pages are dimmed)
Advance Configuration Page:
•
View only access (all selections are dimmed)
Device Information Page:
•
View only access (all selections are dimmed)
Status Page:
•
View only access (all configurations are dimmed)
An attempt by a non-admin user to access a page or selection that requires administrator
security opens a dialog box stating the privileges violation.
An administrator password must enabled before a user ID and password can be set.
NOTE: Passwords must be less than 12 characters long, no spaces, and consist of
alpha-numeric characters only.
To set an administrator password:
1.
Type a password in the Administrator Password: field.
2.
Duplicate the password in the Confirm Password: field.
3.
Click
Save
.
To clear the administrator password, you must be logged on the SMD 101 with
administrator privileges.
1.
In the Login ID: admin panel:, click
Clear
.
2.
Click
Save
.
The user interfaces (DWP, SIS, SFTP) no longer require a password. The user is logged out
and automatically logged back in as the administrator.
NOTE: If a user password is active, clearing the administrator password also clears the
user password.
To change an admin password, you must be logged on the SMD 101 with admin privileges.
In the Login ID: admin panel:
1.
Click
Clear
to remove the previous password, or type a new password in the
Administrator
Password:
field.
2.
Duplicate the password in the
Confirm
Password:
field.
3.
Click
Save
.
The new password is now current and the SMD 101 automatically logs off. Login with the
new password to continue.
SMD 101 • Web-based User Interface
41