Extron Electronics SMD 101 User Guide - Manual (Page 73)

Command and Response Tables
Basic SIS Commands
Command
ASCII command
(host to device) URL Encoded
(web) Response
(device to host)
Information requests
Firmware version Q/q *Q X1!]
Firmware and build
version
*Q/q *Q X1!]
Kernel firmware and build **Q/q **Q X1!]
ID messaging version ***Q/q ***Q X1!]
Verbose version info 0Q/0q 0Q Sum of 2Q‑3Q‑4Q ]
Firmware version 1Q/1q 1Q X1!]
Bootstrap version 2Q/2q 2Q X1!]
Factory firmware version 3Q/3q 3Q X1! plus kernel version,
model number, and load
date
]
Updated firmware version 4Q/4q 4Q X1! plus kernel version,
model number, and load
date
]
NOTE: An asterisk (*) after the version number indicates the currently running version. Question marks (?.??)
indicate that only factory firmware is loaded. A caret (^) indicates the firmware version that should be
running, but a Mode 1 reset was executed and the default factory firmware is running. An exclamation point
(!) indicates corrupted firmware.
General Information I/i SMD •101
Query part number N/n N 60– 1305‑01 ]
Query model name I/i I SMD •101 ]
Query model description 2I/i 2I Streaming•Media•Decoder
Query system memory
usage
3I 3I #Bytes used out of
#KBytes
]
View system processor
usage
11I 11I Returns a percentage of total.
View system processor
idle
12I 12I Returns a percentage of total.
View eth0 link status 13I 13I Current link state, speed, and
mode.
View telnet connections E CC } n ] n=number of active IP
connections.
Set verbose mode E X2@ CV } Vrb X2@]
View verbose mode E CV } X2@]
NOTES: X1! = Version number Firmware version number to second decimal place ( x.xx)
Version and Build number adds four digits ( x.xx.xxxx)
to the Version number
X2@ = Verbose/Response mode 0=clear/none (default for telnet connections)
1=verbose mode (default for RS-232 host control)
2=tagged responses for queries
3=verbose mode and tagged responses for queries
NOTE: If tagged responses is enabled, all read commands return the data, the same as setting
the value does (Example: command: E CV} Response: Vrb3 ]).
01-16-2014: SIS tables updated to Product Proposal Rev 3.01, dated 08-08-2013.
02-11-2014: SIS tables updated from QA and Ian reviews. Also legends and notes modified to
match each other.
02-26-2014: Final round of QA reviews and Ian corrections based on those reviews.
67 SMD 101 • Remote Communication and Control