Extron Electronics SMD 101 User Guide User Manual
Page 71
0
= Off (default)
1
= Crop (not currently supported)
2
= Alternating pixels
3
= Alternating lines
4
= Crosshatch (grid)
5
= 4x4 crosshatch (grid)
6
= Color bars
7
= Grayscale
8
= Ramp
9
= White field
X52*
= Onscreen display timeout: 0 to 501
seconds.
0=disabled,
5=default,
501=never time out
(three digit response, 0 padding).
X53(
= Aspect ratio settings
0 = Fit (zoom)
1 = Fill (each input rate automatically fills
the entire output raster; default)
2 = Follow (each input rate is displayed in
its native aspect ratio)
X54)
= Screen saver mode
0 = Custom color set via DWP
1 = Black screen (default)
2 = Blue with OSD text
X54@
= Video mute
0 = Unmute all (default)
1 = Mute to black
2 = Mute video and sync
X55)
= Audio volume in dB
(0 to ‑100, 1 dB steps)
‑30=default,
‑100=mute 1 dB steps)
X55!
= Analog audio format
1
=dual mono,
2
-stereo (default)
X55@
= Stream mode
0 = Audio and video (default)
1 = Video
X55$
= Source video bit rate in kbps
X55%
= Current source peak video bitrate in kbps
X55(
= Static audio delay in milliseconds
Positive values are 3-digit padded.
Negative values are 2-digit padded
00‑99
and 3-digit
100‑255
.
X56#
= Screen saver status
0 = Input active and timer reset
1
= Input inactive, timer running, and
output active
2
= Input inactive, timer expired, and
output video and sync muted
X56$
= Source audio bit rate (kbps)
X56%
= Source audio sample rate
0 = Reserved
1
= Reserved
2
= 44.1 kHz
3
= 48 kHz
X56(
= Total source bit rate (kbps)
X57^
= Network interface ID
X58%
= System software upgrade operation
(UPGS) status
0 = Idle, no upgrade in progress
1 = Done, upgrade completed
successfully
2 = Busy, upgrade has started, writes
to flash memory not complete
3 = Writing to flash memory
4 = Done, requires reboot to complete
upgrade
5 = Failed, due to insufficient flash
memory space
6 = Failed, due to corrupted file
7 = Failed, due to product ID mismatch
8 = Failed, other
X58^
= IP address or URI
X58&
= Ping result (IP address*Bytes*TTL*time),
returns E13 if URL cannot be resolved or
IP*0*0*0*0 if ping times out
X58*
= OSD window number
1=info panel
2=progress bar
X58(
= OSD window position
1=top left, 2=top center, 3=top right,
4=center left, 5=center center, 6=center
right, 7=bottom left, 8=bottom center,
9=botttom right
X59)
= OSD window visibility
0=hidden
1=visible
2=toggle
X59!
= Playback channel (always
1
for single
channel devices)
65
SMD 101 • Remote Communication and Control