Panels and cabling, Front panel features – Extron Electronics SMD 101 User Guide User Manual
Page 14
Panels and Cabling
This section provides information on:
•
•
•
•
Front Panel Features
The front panel of the SMD 101 is shown in figure 2 below.
SMD 101
IR
CONFIG
A
AB
BC
C
D
D
E
E
A
Power LED
D
IR receiver window
B
Playback status indicator
E
Config port
C
Network status indicator
Figure 2.
SMD 101 Front Panel
A
Power LED — Dual color LED lights solid green when the SMD 101 is powered. Lights
solid red when standby mode is active.
B
Playback status indicator — Dual color LED indicates playback operation:
•
Solid Green — The SMD 101 is actively decoding a source (clip, image, or
stream).
•
Blinking Green — A source (clip, image, or stream) is loaded but paused.
•
Off — Playback has stopped.
•
Solid Red — Unable to load (or play) the selected source.
C
Network status indicator — Dual-color LED indicates network operation and
connection or stream quality:
•
Solid Green — Indicates network conditions are favorable for the current source.
The LED is also green if the current source is a local file (see
•
Red/Green — When flashing red and green, indicates encoder or network
conditions could compromise image or audio quality, and buffers could be
depleted.
•
Red — When lit, indicates degraded server or network conditions are
compromising video or audio quality and may have depleted the buffers.
•
Off — No network connection.
NOTE: In many cases, the error correction features of the SMD 101 allow good
image quality even when degraded network conditions are indicated.
SMD 101 • Panels and Cabling
8