Extron Electronics SMD 101 User Guide - Manual (Page 37)

On Screen Display
The On Screen Display (OSD) page (see figure 26) enables the display of realtime
information about the video output and device operation on a connected display (see
figure 27).
On Screen Display
Status Information
Progress Bar
Position: Left-Top
Position: Center-Bottom
Enable Progress Bar
Enable OSD
Save Cancel
Save Cancel
Duration (Seconds): 5
Duration (Seconds): 5
Figure 26. Configuration Page - On-Screen Display
Status Information Panel
The Status Information panel controls the timing and position of the on-screen status
information that includes stream, network condition, and device information.
Extron Electronics
SMD 101 Stream Media Decoder 192.168.254.254
FW: 1.20
SOURCE RATE
704x576 @ 25 AAC-LC OUTPUT RATE
1080p @ 60
VIDEO STREAM 0
encoding: h264 video
width: 704
height: 576
framerate: 25
interlaced: false
AUDIO STREAM 0
encoding: mpeg4_aac_audio
profile: Ic
channels: 2
rate: 44100
signed: true
STATUS INFORMATION
Network Condition: Very Good
Audio Bitrate: 124 Kbps
Video Bitrate: 3618 Kbps
DEVICE INFORMATION
CPU: 21%
Mem: 37% used
Temp: 58.5C
Date: 12/01/2013 15:10
Figure 27. On-screen Status Information Panel
Enable OSD — Click this checkbox to enable the status information.
Duration (Seconds) — Set the time in seconds the status information is on screen after
the start of playback using the adjustment arrows or enter the time (in seconds) directly.
Default is 5 seconds, maximum is 500 seconds. 501 seconds = always on. The IR remote
can toggle it on or off.
Position — Select the screen position from one of nine positions (left-top (default),
center-top, right-top, left-center, center-center, right-center, left-bottom, center-bottom,
right-bottom) using the drop-down list.
SMD 101 • Web-based User Interface 31